Features; Description Of Machine; Transport And Start Up; Transport And Installation - Jet JDP-15B Mode D'emploi

Drift key
Ring spanner
Column locking handle
Table elevating crank
3 down feed handles
Worm shaft
Allen keys
Bolts and washers for base mount
16mm keyless chuck
MT2/ B16 arbor
Chuck guard
Operating manual
Spare parts list.

4.4 Features

Rapid spindle travel with one revolution of the handle
One-handed belt tensioning allows for rapid speed changes
Integrated depth stop makes repetitive drilling quick and easy
Cross Laser easily identifies the drill centre
Long-lasting, built-in LED work light reduces shadows
Precisely ground cast iron work table
Large table surface features twin T-slot grooves and 4 table
slots to accommodate any project
Table edge designed to make clamping easy
MDF table insert, 95x95mm, height adjustable, easily
replaced
Large cast iron base provides stability
Powered by an efficient high torque induction motor and poly-
V belt drive system
16mm keyless chuck with MT2/B16 arbor supplied
Transparent chuck guard with limit switch, for safe operation
Fig 2
Pulley cover with limit switch, for safe operation
E-stop button, for safe operation

4.5 Description of machine

A...Pulley cover
B...Downfeed handle
C...Downfeed lock
D...LED work light and cross laser
E...Column locking handle
F...Table elevating crank
G...Rack
H...Column
I.....Base
J....Table
K....Table insert (MDF)
L....Chuck guard
M...Spindle quill
N....Switches for work light and cross laser
P....Motor ON/OFF switch
Q....E-stop button

5. Transport and start up

5.1 Transport and installation

The machine is designed to operate in closed rooms and
must be placed stable on firm and levelled surface.
Warning:
To avoid tipping, the machine must be bolted down with
two lag screws (not provided). Fig 4
Fig 3