OGK Urban Iki Rear seat Mode D'emploi page 3

ENG
How to assemble your Urban Iki Rear seat
Your Urban Iki Rear seat child bike seat is easy to assemble. You only need to click
together the left and right leg parts and slide them onto the seat as a whole. The
leg parts are attached to the seat correctly when you hear a click and feel that the
leg parts can no longer slide back.
Step 1: Snap leg parts together
Leg parts (left + right)
Step 2: Slide leg parts under the seat
1. Let cable hang loosely
2. Slide leg parts
CLICK!
1
4
Scan for
instruction video
CLICK!
2
9 O I
9 O I
9 O I
How to attach your Urban Iki Rear seat
to your bicycle
The Urban Iki Rear seat is suited for transporting children
with a maximum weight of 22 kg between the ages of nine
months to about six years old. Check whether using the
Urban Iki Rear seat is legally permitted in the country in
which you wish to use it.
Scan for
instruction video
The bike seat can be attached to any bike rack with a width
between 120 and 175 mm. Only use the Urban Iki Rear seat
on bikes that are equipped to carry heavier loads.
Consult your bicycle's manual or ask the bicycle's manu-
facturer. if your bicycle is technically equipped to carry the
Urban Iki bike seat, then you can attach it as follows.
Step 1: Loosen
Step 3: Position on the carrier
CLICK!
2
Wheel axle wielas
1
9 O I
9 O I
9 O I
Step 4: Check position
Wheel axle wielas
ENG
Step 2: Place on the carrier
Wheel axle wielas Wheel axle wielas Wheel axle wielas
Step 5: Tighten
5Nm
5Nm
5