Quax CAMILLE 76 10 03 0 Serie Manuel page 31

CAMILLE
76 10 03 0xx
Commode met extensie
Kommode mit Wickelansatz
Step 5 : Use the parts of step 4, the back panels E
and twenty four wood screws d
Place the back panels (E) perpendicular to the back
of the cabinet and fi x with the wood screws (d).
Step 6 : Use the crossbeam M, both sides O and
P, two wooden dowels e and two connectors with
cylindrical nut f
Inserts the wooden dowels (e) in the provided
openings of the sides (O and P). Push the connec-
ting slat (M) over the dowels and on the provided
openings of the sides. Insert the cylindrical nuts (f)
in the drillings of the sides, the connectors (f) into
the drillings of the crossbeam and tighten them in
the nuts.
Step 7 : Use the three drawer fronts H, fi fteen connecting bolts b, six
handgrips c and six wood screws h
Tighten fi ve connecting bolts (b) in the provided openings at the inner-
side of a drawer front (H). Push two wood screws (h) into the holes at
the innerside of a drawer front. Place the drawer handles (c) in front of
the same drillings but at the outside of the front and tighten the screws
into the handgrips. Repeat for the remaining two drawers.
Step 8 : Use the three left drawer sides I, the three
right drawer sides J, three backs K, three supports G,
three bottoms L, two wooden dowels e and eightteen
wood screws h
Insert a back (K) between the drawer sides (I and J),
push two wood screws (h) into the drillings on the out-
side of a drawer side and tighten them in the back.
Push two wooden dowels (e) into the drillings on the
inside of the back. Push a support (G) on the dowels,
insert a wood screw (h) into the hole on the outside
and tighten it in the support. Slide a bottom (L) into the
grooves of the drawer. Repeat for the remaining two
drawers.
Commode avec extension
Chest of drawers with extension
Quax Quax
First dreams First dreams
® ®
First steps First steps
31