Permobil ROHO HEAL PAD Mode D'emploi page 7

THE ADAPTOR PAD and ROHO DRY FLOATATION Special Application Cushioning Devices Operation Manual
MINI-MAX and PACK-IT
Intended Use: The ROHO
adjustable, air-filled, cellular-design, neoprene surface intended as
a supplemental seating surface. There is no weight limit, yet the
cushion must be properly sized to the individual.
Intended Use: The ROHO
air-filled, cellular-design, neoprene surface intended for short-term cushioning
needs. There is no weight limit, yet the cushion must be properly sized to the
individual.
Atmospheric Adjustment Instructions for MINI-MAX and PACK-IT:
1. Slide the hand pump nozzle over the inflation valve. Open the
inflation valve, at least one full rotation. Inflate until all of the
air cells feel firm.
2. Remove the hand pump. Do not close the inflation valve. Allow
air to escape from the inflation valve.
3. Listen (or place your hand in front of the inflation valve) to
confirm that deflation has stopped.
4. Close the inflation valve until it comes to a stop. Make sure the
inflation valve is closed.
5. Place the cushion on the surface, making sure the air cells
face the individual.
Note: The inflation valve will spin freely when open.
CHECK INFLATION! After atmospheric adjustment, confirm that there is NO CONTACT
between the individual and the base of the cushioning device. If there is contact, add air.
When possible, use hook and loop fasteners to further secure the cushion to the seating
surface. Hook fasteners are available upon request.
Cover Removal: Unzip the cover and remove the cushion.
MINI-MAX Cover Replacement: Insert the cushion into the cover. Pull the inflation valve and
Yellow Rope through a corner opening.
PACK-IT Cover Replacement: Insert the PACK-IT into the cover. Close the zipper.
MINI-MAX Cushion (MINI-MAX) is an
® ®
PACK-IT Cushion (PACK-IT) is an adjustable,
® ®
5
MINI-MAX
PACK-IT
Open Close