Permobil ROHO HEAL PAD Mode D'emploi page 6

THE ADAPTOR PAD and ROHO DRY FLOATATION Special Application Cushioning Devices Operation Manual
THE ADAPTOR
Intended Use: THE ADAPTOR
design, neoprene surface intended for cushioning and shock absorption needs
and reduction of friction on surfaces such as a wheelchair side, headrest or
footrest to provide skin/soft tissue protection. There is no weight limit. The
ADAPTOR is not intended to be used as a supporting medium under the
buttocks.
Instructions: Use scissors to trim THE ADAPTOR to fit where needed (sides of wheelchairs,
trays, head rests, foot rests). Cut between the sealed air cells when possible. To attach the
product to the surface, use hook and loop fastener strips.
Warning: Air cells that have been cut WILL NOT provide cushioning.
HEAL PAD
Intended Use: The ROHO
neoprene surface and is intended to conform to an individual's heel to provide skin/soft tissue protection
and provide an environment to facilitate wound healing. There is no weight limit.
Inflation Instructions:
1. Place the HEAL PAD flat, with the cells facing up.
2. Slide the hand pump nozzle over the inflation valve. Open the
inflation valve, at least one full rotation
3. Inflate the HEAL PAD. Close the inflation valve until it comes
to a stop. Remove the hand pump. Make sure the inflation
valve is closed.
Note: The inflation valve will spin freely when open.
Attachment Instructions:
Fasten the snaps.
1
CHECK INFLATION! Confirm that there is NO CONTACT between the individual's heel and
the base of the HEAL PAD. If there is contact, add air.
PAD (THE ADAPTOR) is an air-filled, cellular-
®
HEAL PAD Cushion (HEAL PAD) is an adjustable, air-filled, cellular-design,
® ®
.
Place the
2
individual's heel
on the cells.
Place the foam
3
tab over the
shin, insert the
strap through
the metal ring,
and adjust the
strap.
4
Open Close
Foam Tab
Strap