Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Loudspeaker Menu
In the Loudspeaker Menu the following parameters can be set to adjust the DM System to the room:
Personal values
To save all settings set in the loudspeaker menu up to 6 memory cells (<preset>)
Volume adjustment
To adjust the volume level of the individual channels (front left and right, subwoofer, ...)
Distance
To balance out different distances between the loudspeakers and the listening spot
Sound
To adjust the treble and bass sounds to the room and according to personal taste
Bass expand
For the automatic volume-dependent adjustment of the bass volume level
Room adjust
Various parametric equalisers are available to balance out ambient factors
System Menu
In the System Menu the following parameters can be set:
Output config
To set the parameters for the Zone 2 /Line output
Sub output
To activate or deactivate the subwoofer output
Input config
To activate and name the 6 signal inputs (see the chapter "Initial installation")
IR programming
To programme various remote operations (DVD player, TV, ..., see the chapter "Learn Menu")
Lip sync
To synchronise the sound with time-delayed TV images
Dynamics
To adjust the signal compression in the playback of multi-channel signals
Factory Set
The following parameters can be set using Factory Set:
Switch-on volume
Max. volume
Device name
Language
Line 2 config
Factory setting
Firmware
Contrast
To limit the maximum switch-on volume
To establish the maximum volume possible
To select the device configuration (2.1 Mode or 5.1 Mode ...)
To select German or English
To select Line Level Input or Phono Level Input
To return the DM System to the factory setting it was supplied with
To display the software versions (DM, tuner and remote control)
To adjust the contrast settings of the display
40
Publicité
Table des Matières
