Initial Installation - Canton Digital Movie Notice D'utilisation

Initial installation

Before you can use the DM 90.2 you need
to assign the inputs to the connected source
devices. You will be asked to do this when
you first switch the device on.
To get to the input configuration press .
Use the "<" and ">" arrow keys to choose
names for the connected devices. You must
confirm these by pressing "OK".
To exit the input config menu press
to save all the entries. Then press to
end the initial installation and return to the
main menu.
Warning: The arrow keys and may
not be used when assigning the inputs.
Inputs that are defined as "not active" are
not shown in the main menu.
35