Sullair SRHT-15 Manuel D'utilisation page 22

Fig. 3 Safety and description labels on dryer
SRHT- -25
Condensate drain
f
connection
Code: 02250139- - 147 SRHT- - 15 ---SRHT- - 100
a
S Model
S Serial No.
S Low/High side refrigeration
circuit design pressure
S Max air pressure
S Max air inlet
We strongly recommend filter
S Min. ambient
elements be changed once a
Max ambient
year or after 8000 working
S Power supply
hours, whichever comes first.
Electrical diagram no.
S Oil
S Refrigerant
S Weight
Refer to User Manual for
correct replacement element.
WARNING:
g
Risk of electric shock
can cause injury or death.
Disconnect all remote electric
power supplies before servicing.
REMEMBER
b
TO CHANGE YOUR
REMEMBER
FILTER ELEMENT
TO CHANGE YOUR
FILTER ELEMENT
element installed on:
element installed on:
We strongly recommend filter
elements be changed once a year
or after 8000 working hours,
whichever comes first.
Only use genuine
replacement elements.
Refer to User Manual for correct
Only use genuine
replacement element.
replacement elements.
QUALITY
CHECKED
INSPECTOR N. 302
QUALITY CHECKED
c
INSPECTOR N. 302
d
Air inlet
Internal dryer
h
ATTENTION: SCHRADER VALVE
1 This unit is equipped with refrigerant as for quantity and kind clearly shown
in operating manual and with identification label.
2 Any ordinary test and / or refrigerant recharge by means of connections can
take place only after refrigerant evacuation. The evacuation must be pro-
portional to dimensions and length of the connections used. The use of the
valve can be justified only when the dryer is not in working order.
3 During the unit guarantee period, the Schrader valve can be used by autho-
rized staff only, otherwise any damage caused by a wrong refrigerant
recharge will not be under warranty.
e
Air outlet
21