Scuderia Dashboard CWEK00519 Manuel D'utilisation page 8

AUTOMATIc
SINgLE TIME MODELS
Description of the display and control buttons
Setting the time
1. Pull out the crown to position III (the watch stops).
2. Turn the crown until you reach the correct time.
3. Push the crown back into position I.
14
AUTOMATIc
chRONOgRAph MODELS
Description of the display and control buttons
Setting the time
1. Pull out the crown to position III (the watch stops).
2. Turn the crown until you reach the correct time.
3. Push the crown back into position I.
Chronograph
- The chronograph's hour counter measures times up to 12 hours
- The minute counter measures 30 minutes per rotation.
- The center stop-second measures 60 seconds per rotation.
Chronograph: Basic function (Start / Stop / Reset)
1. Press pusher 2 to start the center stop-second hand.
2. To stop the timing, press pusher 2 again.
3. To reset the three chronograph hands to zero positioning, press pusher 1.
PLEASE NOTE : Before using the chronograph functions, please ensure that :
- the crown is in position I (=normal position)
- the three chronograph hands are precisely at zero position following activation of pusher 1.
A Hour hand
B Minute hand
C
Second hand
D Crown
E Hour counter
F Center stop-second
G Minute counter
H
Pusher 1(reset)
I Pusher 2(start/stop)
J Date
15