Scuderia Dashboard CWEK00519 Manuel D'utilisation page 7

QUARTZ
chRONOgRAph MODELS
Description of the display and control buttons
Setting the time
1. Pull out the crown to position III (the watch stops).
2. Turn the crown until you reach the correct time.
3. Push the crown back into position I.
Setting the date
1. Pull out the crown to position II (the watch continues to run).
2. Turn the crown until yesterday's date appears.
3. Pull the crown out to position III (the watch stops).
4. Turn the crown until the correct date appears.
5. Continue to turn the crown until the correct time appears.
6. Push the crown back into position I.
Chronograph
- The chronograph's hour counter measures times up to 12 hours
- The minute counter measures 30 minutes per rotation.
- The center stop-second measures 60 seconds per rotation.
PLEASE NOTE :
Before using the chronograph functions, please ensure that :
- the crown is in position I (=normal position).
- the three chronograph hands are precisely at zero position following activation of pusher 1.
Should this not be the case, the position of the hands must be adjusted
(see the chapter entitled "Adjusting the chronograph hands to zero position").
12
Chronograph: Basic function (Start / Stop / Reset)
1. Press pusher 2 to start the center stop-second hand.
2. To stop the timing, press pusher 2 again.
3. To reset the three chronograph hands to zero positioning, press pusher 1.
Chronograph: Intermediate or interval timing
1. Press pusher 2 to start the center stop-second hand.
2. Press pusher 1 to stop the chronograph.
NOTE: Although the chronograph hands have stopped, the movement continues to record
the current timing.
3. Make up the measured time: Press pusher 1 again and the 3 chronograph hands are
quickly advanced to the ongoing measured time. To continue to record intervals, continue
to push pusher 1.
4. Press pusher 2 to stop and the final time is displayed.
5. To reset the three chronograph hands to zero positioning, press pusher 1.
Adjusting the chronograph hands to zero position
1. Pull out the crown to position III (all three chronograph hands are in their correct or
incorrect zero position).
2. Keep pusher 2 and 1 depressed simultaneously for at least 2 seconds (the center stop-
second rotates by 360º - corrective mode is activated).
3. Press pusher 2 to single step the center stop-second hand. Press and hold pusher 2 to
advance the center stop-second hand quickly. Press pusher 1 to advance the next hand.
4. Press pusher 2 to single step the hour counter hand. Press and hold pusher 2 to advance
the hour counter hand quickly. Press pusher 1 to advance to the next hand.
5. Press pusher 2 to single step the minute counter hand. Press and hold pusher 2 to advance
the minute counter hand quickly.
6. Return the crown to position I.
A Hour hand
B Minute hand
C
Second hand
D Crown
E Hour counter
F Center stop-second
G Minute counter
H
Pusher 1(reset)
I Pusher 2(start/stop)
J Date
13