Lightcraft 10028035 Mode D'emploi page 29

Button Description
ON/OFF
PROG
CPW
MET
PREV
NEXT
CAP
TIME
SPE
FONT
COL
SYM
CLR
GRA
<= / =>
ALT
PAU
PHR
BEEP
ENT
ESC
Power On/Off.
lf there is no file in 01 to 99, it will run file 00.
lf there is any file in 01 to 99, it will display the last saved file.
Enter the Edit Program Mode. Select 01 to 99 to enter message.
Use for edit or reset password. Use PREV and NEXT to select
(a) UNUSE PASS
(b) USE PASS
(c) RES PASS
(d) CHANGE PASS
To select the display modes, totally up to 24 different modes.
Use PREV/NEXT to select. Please see appendix A for further information.
Backward/Left
Forward/Right
Capital characters / Lower case
Select time options (see appendix B)
Set the display speed (change by PREV/NEXT)
Set the font size (change by PREV/NEXT)
Set the color (change by PREV/NEXT)
Choose out of 30 available symbols (change by PREV/NEXT)
Clear
Select graphic option (change by PREV/NEXT)
Playce a graphic in the message. Use PREV/NEXT, to se-
GET GRAPH
lect from GRAPH A - GRAPH P.
Create new graphics (GRAPH A - GRAPH H)
MAKE GRAPH
Edit the presets GRAPH A to GRAPH P and save as GRAPH
EDIT GRAPH
A to GRAPH H
Moving the message and command to the right / to the left.
Note: IF YOU WANT TO DELETE MESSAGE OR COMMAND IN THE EDIT PRO-
GRAM MODE, PLEASE USE ABOVE KEYS TO MOVE THAT MESSAGE OR COM-
MAND TO THE LEFT-MOST POSITION AND PRESS DEL
IF YOU WANT TO INSERT MESSAGE OR COMMAND IN THE EDIT PROGRAM
MODE. PLEASE USE ABOVE KEYS TO MOVE THAT MESSAGE OR COMMAND TO
THE LEFT-MOST POSITION AND (1) PRESS INS TO INSERT. (2) TYPE IN YOUR
MESSAGE OR PRESS COMMAND KEY, IT WILL INSERT AUTOMATICALLY (3)
PRESS INS AGAIN TO OVERWRITE.
Hold for alternate key assignment
Generate a pause within the programmed message. (Change length with
PREV/NEXT)
Select a programmed animation in the message. (Select with PREV/NEXT)
Select beep sound in the message. (Select out of 3 options with PREV/NEXT)
Enter = Confirm current option
Return to the upper manual in the edit program mode.
Turnoff password security.
Turn on password security.
Reset to factory default password „000".
Change to new password
29