Initial Use/Pc Connection; Software - Overview - Lightcraft 10028035 Mode D'emploi

Connect the display to a computer in the below shown way to control the device through a special
and a COM (RS232) cable coming with the device.
Also, it is possible to înteract with the device through the supplied remote control. You can further-
more combine both ways by first editing messages and graphics on the computer and then control
these with the RC - this way, there is no stationary computer needed mandatorily.
Connection diagram:
When you plug in the sign's power supply, the sign starts up automatically. The other way round: In
order to turn the sign off, you can simply unplug the power supply or use the remote control. Please
mind, that any data concerning timer settings and similar are gone then and need to be re-edited.
The messaging Software allows you to send messages to your sign using a computer.
• Turn on your computer and start Windows 2000/XP/7 .
• Insert the software CD disk into CD-ROM, or you can copy the software into your PC for the easy
operation.
• Double click the icon to activate the programming software, this is what should appear on your-
computer screen:
Initial Use / PC Connection

Software - Overview

1 Color Type
Piease select single color.
Sign dimension
2
The length of the display
10028035: 80 Pixels;
10028036: 120 Pixels.
3 Country
The default setting is West
Europe
Click OK to enter into the main
screen as follows;
26