OTT HydroMet KIPP&ZONEN SMP12 Notice D'utilisation page 37

7 Faults
7.1 Troubleshooting
Fault
Output signal not available
or incorrect
SMP12 Smart Pyranometer | EN
Possible cause
Pyranometer doesn't work
properly
Measures
4 Check that the cables are correctly connected to
the reading device.
4 Check the voltage supply,12 to 24 VDC are
recommended.
4 Check the location for obstacles that block the
direct solar radiation.
4 Check the glass dome for contamination.
4 Check that the leveling is correct.
4 Report any malfunctions or damage to the
representative of OTT HydroMet.
Faults | 7
37