WOLFF FRASMASTER 18V Traduction Du Mode D'emploi Original page 44

Maintenance
WARNING
- Always remove the battery (1) before carrying out any maintenance work on the grooving
machine.
- The sharp cutting edges can cause injuries. Therefore, it is absolutely essential to wear
protective gloves.
FRÄSMASTER 18V
- Do not use water or liquid cleaning agents.
- Always use dry compressed air to blow out the inside of the housing containing the spindle.
- Clean the outside of the unit, particularly the adjusting device and all rollers, to maintain the accuracy
of the cut groove.
- Spray the pivots occasionally with machine oil.
- Regularly clean the ventilation slots in the cover plate.
Cutter blade
Care
- Protect the cutter blade from moisture to avoid corrosion.
- Cleaning agents can harm the skin or eyes and damage the tool. Wear protective gloves and eye
protection while cleaning.
- Only use suitable cleaning agents. It is essential to follow the instructions provided by the cleaning
agent manufacturer.
Intended use
- The FRÄSMASTER 18V grooving machine is only to be used with the type of feed and
operated at the speed marked on the tool body.
Repairs/sharpening
Read the operating instructions
(specific information can be found in the associated manual for the cutter blade), website link:
http://webcatalog.wolff-tools.com
Charger and battery
WARNING
Disconnect the power plug from the power outlet before carrying out any maintenance work on the
charger. Do not use water or liquid cleaning agents.
- Use a dry cloth to remove dust and dirt from the housing.
Read the operating instructions
(specific information can be found in the associated manuals for the charger and battery),
website link: http://webcatalog.wolff-tools.com
44
All manuals and user guides at all-guides.com