Transport - WOLFF FRASMASTER 18V Traduction Du Mode D'emploi Original

Transport

Comply with applicable national regulations regarding the carrying or lifting of loads.
The weight of your FRÄSMASTER 18V including the carrying case is 20.28 lbs. (12.12 lbs.
including the battery).
Only use the carrying case included in the scope of delivery (see 5.2 Scope of delivery [9]) and the
carrying case's handle to transport the grooving machine.
______________________________________________________________________________
Never use the handle (4) on the unit or on the carrying case to transport it with a crane.
______________________________________________________________________________
CAUTION
Always check that the grooving machine has been turned off before transporting it. The main
switch (5) must not be pressed.
The spare battery must always be stored inside the transport box with the terminals pointing down.
In general, any batteries that are not currently in use should be stored inside the carrying case.
When battery pack is not in use, keep it away from other metal objects, like paper clips,
coins, keys, nails, screws, or other small metal objects that can make a connection from one
terminal to another. Shorting the battery terminals together may cause burns or a fire. Do not
ship/transport defective batteries.
Always transport the unit inside suitable packaging. Otherwise, there is a risk of damaging the
cutting edges.
CAUTION
RISK OF INJURY Do not to press the main switch when removing the unit from the case. Please
also avoid reaching into the cutting area with your hands and do not touch the cutter blade or
cutting edges of the guide roller (9)/rear guide roller (20) when removing the unit.
To lift the grooving machine by hand, use the handle (4). Before placing the grooving machine inside the
carrying case, you must first detach the dust bag (3).
30
All manuals and user guides at all-guides.com
4