WOLFF FRASMASTER 18V Traduction Du Mode D'emploi Original page 34

Adjusting the side roller for pimpled flooring
For pimpled flooring, move the side roller (15) if necessary. To do this, loosen the screw with the size 5
hexagon key (16) and move the side roller (15) to the required position. Then retighten the screw.
Ejector tube
WARNING
RISK OF INJURY due to flying particles.
- The FRÄSMASTER 18V is only to be operated with the ejector tube (7) connected to the
dust bag (3).
- Wear eye protection.
Never reach into the chip ejector.
-
The ejector tube (7) can be attached at any angle. When attaching it, make sure that the union nut (23)
has been tightened correctly.
3
34
All manuals and user guides at all-guides.com
Screw
15
7
23