Install The Oven - Silverline MW9012X01 Mode D'emploi

B. Install the Oven
ADJUST SCRE A
1. Fix ADJUST SCREW A on the UPPER AIR TUNNEL of the oven, and
then install the oven into the cabinet.
x
Adjust the height of ADJUST SCREW A to keep 1mm gap between the
x
ADJUST SCREW A and the top plane of cabinet. Do not trap or kink the
power cord.
x
Make sure that the oven is installed in the center of the cabinet.
SCRE B
INSTALLATION HOLE
UPPER AIR TUNNEL
TRIM-KIT
TRIM-KIT PLASTIC COVER
42
ADJUST HEIGHT
ADJUST SCRE A
TRIM KIT
INSTALLATION HOLE