Electrical Connection; Built-In Furniture - Silverline MW9012X01 Mode D'emploi

Please Note

Electrical connection

The oven is fitted with a plug and must be only connected to a properly
installed earthed socket. In accordance with the appropriate regulations, the
socket must only be installed and the connecting cable must only be replaced
by a qualified electrician.
If the plug is no longer accessible following installation and all-pole isolating
switch must be present on the installation side with a contact gap of at least
3mm.
A. Built-in furniture
The built-in cabinet shall not have a rear wall behind the appliance. Minimum
installation height is 85cm.
Do not cover ventilation slots and air intake points.
1.
600
+8
560
18
18
min
340
+3
362
40