FLIR Lorex LNZ32P12 Manuel D'utilisation page 7

3 Connecting the Camera
Step 1 of 2 — Option A: Connecting the camera to your local network using an op-
tional PoE+ switch:
1. Connect an Ethernet cable of up to 300ft (91m) rated CAT5e or higher (not included)
from the LAN port on an external PoE+ switch (sold separately on
www.lorextechnology.com) to your router. Connect the power cable to the PoE+ switch
and to a power outlet or surge protector.
NOTE
Terminology may vary depending on the model of PoE+ switch you have.
2. Connect the camera to the PoE+ switch using the included Ethernet cable (or a CAT5e
Ethernet cable of up to 300ft (91m)). The PoE+ switch will provide power and video
transmission the same way as your NVR.
#LX400020; r.35429/35429; en-US
4