Electrical Connections - Marklin Digital m83 Mode D'emploi

Electrical Connections

The 60822 Power Supply Unit requires only voltage supply
from the 66360/60361/60365/66367 switched mode power
pack.
The connections to the m83 / m84 decoders are done by
means of the side plug connection directly from device to
device, without an intermediate cable or wire.
The digital signal from the track (B/0) must be supplied at
the first m83/m84 connected to the system.
The 60822 Power Supply Unit cannot be supplied with
voltage by being connected to the track.
k83
Older k83 decoders can also be supplied with power with
the 60822 Power Supply Unit. These are connected to it
according to the graphics nearby on this page.
When using several k83 units, power must be supplied to all
using red, brown, and yellow.
60822
Connections for
Anschluss für 66360/66361
66360/66361/66365/66367
L
0
B
decoder k 83
k83
0 B
B 0 L
m83 / m84
7