7.2,
FIRST START.
· Load water as described in paragraph "Water load".
· Place the mains switch (1) to "ON", the lamp line (2) will
light on.
· Raise the lever (4) and hold it up until no water comes
out of the group (5), it indicates that the boiler reservoir
is full of water, then lower the lever (4).
· Turn the switch (6) to "ON", it automatically starts the
pump for the automatic filling of the steam boiler. Wait
for the automatic interruption of the filling. If, during
filling, you hear the sound of a buzzer, set the switch
(6) to "OFF" and then back to "ON" and wait for the
complete filling of the steam boiler.
· Turn off the machine by placing on "OFF" the main
switch (1).
3
6
on
5
off
on
on
4
off
1
2
19