Publicité
Les langues disponibles
Les langues disponibles
WL1S-LED
INSTALLATION INSTRUCTIONS
CCT SELECTABLE SWITCH
-
CCT selectable switch is accessed inside the fixture housing. Can be set at
3000K/4000K/5000K CCT.
Note
:
-
Photocell can be disconnected by cutting and capping (separately) the wires
connected to photocell.
WIRING
•
Check that the line voltage is correct.
•
Connect fixture GROUND (green) wire to power supply GROUND (green) wire.
•
Connect fixture WHITE wire to power supply NEUTRAL wire.
•
Connect fixture BLACK wire to power supply LINE wire.
•
The fixture includes 0-10V dimming functionality, connect GREY or PINK and
VIOLET wires to a 0-10V dimming controller (optional).
RAB Design Lighting inc.
May – 2022
Page 2 of 2
Publicité
