Abus TVIP41560 Mode D'emploi page 28

5
28
Accessing the network camera for the first time
• The network camera is accessed for the first time using the ABUS IP
Installer.
• After the installation wizard is started, it searches for all the
network cameras and video servers connected in your network.
• You can find the program on the CD-ROM included. Install the
program on your PC and then run it.
• If a DHCP server is available on your network, the IP address is
assigned automatically for both the PC/laptop and the network
camera.
• If no DHCP server is available, the network camera automatically
sets the following IP address: 192.168.0.100.
• Your PC system must be located in the same IP sub network to
establish communication with the network camera.
English