GPO PICCADILLY Mode D'emploi page 10

UNPACKING YOUR TURNTABLE
1. Carefully remove the turntable and accessories from the box.
2. Place the turntable on a flat, level surface and carefully open the lid.
3. Remove the white protective Stylus Cover by gently pulling it away
from the TONE ARM (3) as shown below.
4. Carefully remove the twist-tie from the TONE ARM (3).
5. Release the TONE ARM LOCK (5) by holding the TONE ARM (3) to
the TONE ARM REST and pushing the TONE ARM LOCK (5) to the
right.
• NOTE:
1. Please do not discard the white protective stylus cover, as it can
protect the stylus when the turntable is not in use or is being moved.
2. Felt protector pad should be left on the turntable for added protection
to vinyl.
3. Please connect the L&R SPEAKERs correctly before use.
SPEAKER
1. Please connect the speaker to the unit before use.
2. Use the included Red & Black speaker line to connect the turntable
to the Speaker. Simply plug the Red & Black ends of the speaker
line into the corresponding Red & Black L&R SPEAKER OUTPUT
terminals on the rear of the player. Then connect the other Red
& Black ends of the speaker line into the Red & Black SPEAKER
AUDIO INPUT JACK(16) on the rear of the Speakers
10
GPO_Piccadilly_user_Manual EU - AUG 2018 V1.indd 10 14/08/2018 16:57