HEATER Key - On-off key for the heating system. Press this key the heating system will start
working and the red indicator lamp will be on. Press again and the heating system will stop working and the lamp
will be off.
When pressing down the key 'HEATER', the heating system will start working and the red indicator lamp will be
on. At the same time, the red indicator lamp of the key FILTER will also be on and the filter pump will start working, too.
This is a normal phenomenon required by the design.
When the preset temperature has been reached, the heating system will stop working, but the heating indicator light will not
turn off. The filter pump will continues to operate, the indicator light is on also. When the water falls 2°C below the preset
temperature, the heating system will begin to automatically heat the water back up to selected temperature.
TEMPERATURE Key – Key for setting temperature. Press this key and the numbers on the
display screen will start flashing, and the keys for increasing or decreasing temperatures can be pressed to set
the temperature. When settings are finished, press the TEMPERATURE Key again to confirm
is 40°C, and temperature can be set in the range of 20-42°C.
------ Key for increasing temperature
------ Key for decreasing temperature
Default temperature
.