Lipo Battery Charging; Get The Helicopter Ready For Takeoff - Carson Easy Tyrann 180 Glow Manuel D'instructions

LIpo battery cHargIng

• Switch off remote control and helicopter
• Connect helicopter to charging socket
• Status LED lights up BLUE while charging
• Status LED goes out – charging finished

get tHe HeLIcopter reaDy For takeoFF

Now we're good to go! But before liftoff, make sure that you have read this manual through completely.
ON/OFF
1
Push the throttle lever fully down and then switch on the trans-
mitter.
3
Now move the throttle lever completely up and then back down.
Now the helicopter is ready to launch.
GB // 22
2
Switch on the helicopter and place it on a flat surface.
ON/OFF
switch