Uline H-8396 Mode D'emploi page 4

Figure 12
Top Bracket
Figure 13
Bottom
Bracket
Figure 14
Middle
Brackets
Figure 15
Figure 16
Figure 17 Figure 18
PAGE 4 OF 15
PANEL ASSEMBLY CONTINUED
4. Secure back panels with back panel brackets by attaching brackets
at top and bottom of the back panels. (See Figures 12-13)
5. Space third and fourth brackets evenly in the middle of the back panel.
Install brackets through shelves for maximum security. (See Figure 14)
ATTACH FRONT DOORS
1. Align left front door hinges with side panel hinges and lower door into
place. (See Figure 15)
2. Repeat process with right front door.
LATCH FRONT DOORS
1. Slide the handle rod with latch into the U-shape hooks. (See Figure 16)
2. Assemble brackets with one bolt and one nut. (See Figure 16A)
3. To ensure the front doors latch properly, close the left front door first.
A
4. Raise the latch and close the right front door. Lower the latch into place
to secure door. (See Figure 17)
5. A padlock (not included) may be secured to the latch as shown.
(See Figure 18)
NOTE: If anchoring cage to floor, see page 5.
1020 IH-8396