Safety 1st MO175 Mode D'emploi page 12

d . Ensure holes of the provided wall clips are aligned with the
wall anchors and insert provided screw. Using a screwdriver,
hand tighten a screw into each wall
clip.
e . The cord can also be tucked under
the slots on the left or right side of
the monitor's base for additional cord
management.
Flat Surface Mounting
3'
(0.9 m)
1 . Determine an optimal monitor
placement, keeping the monitor
and power cord at least 3 ft
(0.9 m) away from crib. The
monitor should be placed on a
flat surface, such as a chest of
ies)
drawers, a desk, or a shelf.
2 . Before proceeding to the next step. Ensure that the viewing angle
is to your liking by verifying the app. Rotate and tilt the monitor
as needed.
3 . Follow Step 9 a-d of Wall Mounting: WALL CLIPS. Use the
included wall clips to secure the cord at least 3 ft (0.9 m) away
from the crib. This will help reduce the chance of the monitor
slipping, sliding, rotating or falling over.
0.9 m
(3 pies)
3'
(0.9 m)
10