Safety 1st MO175 Mode D'emploi page 11

6 . Locate the hole underneath the base of the
monitor and place it on the wall mount.
7 . Applying light pressure to the base, slide the
monitor DOWN on the wall mount until it
clicks firmly into place. DO NOT pull on the
monitor head. Rotate and tilt the monitor to
ensure it is fully attached to the wall mount.
a . To remove the monitor from the wall, push up on the base until
3'
(0.9 m)
8 . Before proceeding to the next step. Ensure that the
viewing angle is to your liking by verifying the app.
Rotate and tilt the monitor as needed.
9 . WALL CLIPS: Use the included wall clips to secure
the cord at least 3 ft (0.9 m) away from the crib:
a . Repeat steps 3 and 4 to install the wall anchors
b . Place cord into the wall clips, leaving a
c .
9
3'
(0.9 m)
it releases from the mount. NEVER leave the monitor hanging
3'
on the wall mount without clicking in place.
(0.9 m)
into the drywall. Ensure that wall anchors are
placed 2 ft (0.61m) apart.
little slack.
Align wall clip hole to wall anchor. Close
the top cover to secure the cord in place.
3'
(0.9 m)
Top
(left side)
Wall
(right side)