Resistance Measurement - PROTEC.class PMMM Mode D'emploi

Alternating current
Range
200 µA
2000 µA
20 mA
200 mA
2 A
10 A*
Overload protection: F 250 mA / 690 V fuse protection for µA and mA ranges.
10 A range is protected by 10 A / 690 V.
* On 10A-range pay attention to maximum ON/OFF time!

Resistance measurement

Set the selector switch to measurement range 'Ω'. Insert the black test lead
into the 'COM' socket and the red test lead into the 'V Ω A' socket. Using the
test probes, touch the test points of the test object. The multimeter
automatically searches for the most suitable measurement range. Read
measurement value on the display.
Resistance
Range
200 Ω
2k Ω
20 kΩ
200 kΩ
2 MΩ
20 MΩ
Measurement voltage: 0.25 V.
Over-range protection: 600 V AC / DC < 30 s.
To protect against overheating, measurements should not be
taken for more than 30 seconds. Following this the device
should be allowed to cool down for at least 30 minutes.
Resolution
0.1 Ω over-range
protection: 250 V AC /
DC
0.001 kΩ
0.01 kΩ
0.1 kΩ
0.001 MΩ
0.01 MΩ
Resolution
0.1 µA
1 µA
0.01 mA
0.1 mA
10 mA
0.01 A
27
Accuracy
± 1.3% of rdg. + 5 digits
± 1.5% of rdg. + 8 digits
Accuracy
± 1% + 5 digits
± 1 % + 5 digits
± 1.8 % + 5 digits