PROTEC.class PMMM Mode D'emploi page 23

Caution!
Use only included safety test leads or equivalent
with at least same measuring category CAT IV 600 V.
| In order to avoid an electrical shock hazard you must observe
the specified precautionary measures when working with
voltages greater than 120 V (60 V) DC or 50 V (25 V) eff. AC.
These values represent the specified limits of safe-to-touch
voltages in accordance with DIN VDE (values given in brackets
apply to medical or agricultural applications).
| Before taking each measurement, ensure that the test leads
and the measuring instrument are in a flawless condition.
| The test leads and test probes must only be handled using the
isolated grips. Avoid touching the tips of the test probes under
all circumstances.
The test instrument must only be used for the specified
measurement range.
Attention!
Each time before use, inspect the instrument to
ensure that it is working faultlessly (for example, on
known source of voltage). Please also refer to DIN
VDE 0105, Part 1.
23