Important Information; Safety Information - Scott KL 2500 LED Conseils D'utilisation

KL 2500 LED – Operating instructions

1. Important information

Symbols used
Symbol Meaning
Warning of danger (caution, obey documentation)
LED-radiation (caution, do not stare into beam!)
Intended use
The KL 2500 LED cold light source is intended for industrial and laboratory applications.
Cold light sources are used for the intensive illumination of all types of objects. High-intensity visible
light is guided to the object using flexible or self-supporting, movable light guides.
In accordance with the EN 62471:2008 standard the KL 2500 LED is a product of Risk Class 2.
The KL 2500 LED fiber optic light source conforms to the following European directives:
2014/35/EU (Low Voltage Directive)
2014/30/EU (EMC Directive)
2011/65/EU (RoHS)
The technical documentation and full compliance with the standards listed below proves the
conformity with the essential requirements of the above EU Directives:
EN 61326-1:2013
EN 61010-1:2010
EN 50581:2012

Safety information:

Please read and obey these instructions carefully. The instrument's safety cannot be
guaranteed if they are not obeyed.
Never look directly into the open light guide socket or the light guide exit during operation (danger of
ophthalmic injury)!
The KL 2500 LED emits high-intensity visible light. Because light-absorbing materials have the
physical property of converting incident light into heat, damage can arise to heat-sensitive or
flammable light-absorbing materials. To avoid such thermal damage and the potential danger of fire
or burns, please obey the following instructions:
 Never cover up the light guide socket or light guide exit (danger of fire)!
4/12