Wheel Assembly; Assembly Instructions - Paramount LIP 10 A TGG Manuel D'instructions

Wheel Assembly

Use M6 x 25mm bolts to attach wheel assembly brackets.
STEP 1
1-1 Place the 3 post mounting brackets on the Cylinder Base as shown.
1-2 Use 3-M8 x 16mm bolts to secure brackets to the base.
STEP 2
2-1 Place the short upright support onto the top of the post brackets, aligning
pre-drilled holes as shown.
2-2 Use 6-M6 x 35mm bolts, washers & nuts to attach post to post brackets.
Tighten securely.
2-3 Put the long pole onto the base of support post and use 4-M6x10mm bolts
STEP 3
Carefully, slide the tank cover over the post and onto the cylinder base. Tank
For questions, replacement parts, service help or other assistance,
please call the Customer Service Hotline!
All manuals and user guides at all-guides.com

ASSEMBLY INSTRUCTIONS - 7

1
2
2-3
3