Construction Characteristics; Technical Data - Paramount LIP 10 A TGG Manuel D'instructions

CONSTRUCTION CHARACTERISTICS

Color: Brushed matte finish on stainless steel models. (Powder coat finish on steel models)
Casings: Base material on Deluxe Models feature stainless steel. (Galvanized sheet metal on steel models)
The burner is controlled using a positive lock, on/off gas control valve. The gas supply is controlled from gas
cylinder valve. The burner & burner assembly components are constructed from stainless steel. Emission of
infrared heat is assisted by the aluminum reflector hood.
SAFETY Feature : This appliance has built in ''gas cut off'' switch that shuts off the gas supply to the heater
assembly head any time the Burner Unit is tilted beyond 18 degrees or burner flame is extinguished.

Technical Data

Operating pressure with gas
Inlet gas supply pressure
Max. Heat rating
Low setting rating
Radiant Heat Range
Fuel Type
Cylinder Size
Consumption Rate
Gross Weight
Certifications
Gas Pressure Main Orifice
Water Column Diameter in mm
11'' (2.75 Kpa) 1.8
MADE IN CHINA
WARNING !
All manuals and user guides at all-guides.com
: 11''WC (water column) (2.75 Kpa)
: Min. 5 psi, Max. – 150 psi
: BTU 46,000
: BTU 17,500
: 14 ft. To 16 ft. Diameter
: Liquid Propane Gas
: Standard Industry 20 lb. Cylinder (5 gal. Cylinder capacity)
: Approx. 10 hrs. at highest setting
: 53 lbs.
: CSA
** WARNING **
Improper operation, installation, adjustment,
alteration, servicing or maintenance can cause
severe property damage and/or serious damage
and/or serious injury or death. Please read the in-
stallation, operating and maintenance instructions
thoroughly before installing, operating or servic-
ing this appliance.
GENERAL DESCRIPTION - 4