Step 12
Fasten the HUTCH BOTTOM (K) to the RETURN
å
FRAMES (X and Y) and HUTCH MOLDING (CC).
Tighten fi ve BLACK 1-3/8" HEX HEAD SCREWS (23)
using the L-WRENCH (15).
NOTE: Start each SCREW a few turns before
å
tightening any of them.
Y
423446
CC
K
www.sauder.com
23
BLACK 1-3/8" HEX HEAD SCREW
(5 used in this step)
15
X
Page 17