TooQ TQE-3527 Mode D'emploi page 15

3. Connect the hard disk with the connector
carefully and make sure that the hard disk
and the connector are firmly connected. Then,
insert the HDD into the enclosure.
Caution: Do not touch the chipset on the
PCB or the guarantee will be void.
4. Fasten 2pcs screws to fix the cover and
finish the installation.
5. Connect the USB type B male connector
of the cable to the USB port of the case.
6. Connect the DC Jack to the power input
of the case
7. Connect the USB Type A male connector
of the main cable to the computer´s USB 3.0
port. If the cable is connected to a USB 2.0
or USB 1.1 port, the transfer speed will
down to 480Mbps or 12 Mbps.
03