Care & Cleaning; Cleaning The Glass Jug - Breville the Smart Tea Infuser BTM600 Manuel D'instructions

Care & Cleaning

CLEANING THE GLASS JUG

1. After each use, empty the glass jug.
Do not allow brewed tea to stand overnight.
2. Wipe the interior of the glass jug with a soft
damp sponge or rinse with warm water.
3. Wipe the exterior of the glass jug with a soft
damp cloth to clean.
WARNING
Never immerse or wash exterior of glass jug
under running water.
NOTE
Do not use chemicals, steel wool, or abrasive
cleaners to clean the inside or outside of the
glass jug as these may scratch the surface.
4. To remove the build-up of tannin, the
astringent chemical constituent of tea, fill
the glass jug with water up to the MAX
mark and bring water to boil and allow
water to cool for one minute. Add contents
of Breville Tea Maker Cleaner (available at
Breville web page) and allow to stand for
5 minutes. Empty Breville Smart Tea
Infuser™, refill with fresh water and boil.
Repeat this step again. Empty the Breville
Smart Tea Infuser™ and rinse thoroughly.
5. Dry thoroughly with a soft, lint-free cloth
before using.
12
NOTE
Through regular use over time, scale
build-up can affect the performance and the
life of the Breville Smart Tea Infuser™. Lime
and phosphate are common forms of scale
that can damage your Breville Smart Tea
Infuser™. Lime scale, a harmless mineral,
comes in the appearance of white-coloured
or rusty looking build up on the inner walls
and inner base of the glass jug. Phosphate
scale can't be seen, however, it can cause the
water to appear cloudy when heated. To
prevent scale from damaging your Breville
Smart Tea Infuser™, ensure to descale the
glass jug regularly.
Use Breville Descaler (available at Breville
web page) and follow the instructions.
NOTE
Allow all parts of the Breville Smart Tea
Infuser™ to cool completely before
disassembling and cleaning.
WARNING
Never immerse the BASE OF THE GLASS
JUG, POWER BASE, POWER CORD or
POWER PLUG in water or allow moisture
to come in contact with these parts.