Team kalorik TKG CKP 1001 Mode D'emploi page 6

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
FIELD OF APPLICATION/OF OPERATION
Use the appliance for domestic purposes only and in the way indicated in these
instructions.
This appliance is intended to be used for domestic applications and similar
applications such as:
Kitchen corners reserved for personnel in shops, offices and other
o
professional environments.
Farms.
o
The use by clients of hotels, motels and other environments with a
o
residential character.
Environments of the "bed and breakfast" type.
o
USE
First check that the voltage marked on the product is the same as your supply
voltage.
Select a suitable position close to an electric socket, on a dry and even surface.
Make sure the control is in the OFF position (MIN). Plug in.
The invisible protective coating must be removed before you can use the appliance.
To do this, set the control to the maximum setting and leave switched on for
approximately
3-5 minutes. Smoke will develop make sure that the room is ventilated. Switch off the
cooking plate and allow to cool down completely. The cooking plate is now ready
for use.
Always use flat-bottomed saucepans, which make good contact with the cooking
plate. The saucepan bases should ideally be of the same size as the cooking plate.
Select the temperature. Turn temperature controller from "MIN" to "MAX" and adjust
during cooking as needed. The cooking plate has a range of temperatures. The
indicator light will turn on to indicate that the cooker is heating. The indicator light will
turn off when it reaches the selected temperature.
Due to the cooking plate's construction, residual heat will remain after switching off.
This may be used to keep food warm for a short period.
After use, turn the temperature dial to "MIN" and unplug the appliance from the
electrical outlet.
Note:
Use only stainless steel, aluminium and ceramic. NOT GLASS.
Use cooking pots or pans that have a flat base.
The diameter of the pan base needs to be smaller than the diameter of the heating
plate.
CLEANING
Before cleaning, unplug and wait for the appliance to cool down.
Wipe with a moistened cloth.
Do not clean with any abrasive scouring pad or steel wool, as this will damage the
finish.
Do not immerse in water or any other liquid.
TKG CKP 1001
6

Publicité

Table des Matières
loading

Table des Matières