Phillips Head
Step
Ladder
Screwdriver
READ ENTIRE INSTALLATION PROCEDURE BEFORE YOU BEGIN!
CAUTION!
BURN HAZARD: Allow light to cool down
prior to touching.
CAUTION
Fixture will reliably operate between the
temperatures of -20°F to 122°F. (At temperatures above
92°F, the passive infrared (PIR) sensor may not detect
body heat.)
WARNING!
Do not look directly at the LEDs for an extended period
of time. They can cause eye damage.
WARNING!
Use alkaline batteries only. Do not use carbon zinc
batteries and DO NOT mix battery type.
FCC STATEMENT:
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) Reorient or relocate the
receiving antenna. 2) Increase the separation between the equipment and receiver. 3) Connect the equipment into an outlet on a circuit di erent from that of the receiver. 4) Consult
the dealer or an experienced radio/TV technician for help. FCC responsible party name : Good Earth Lighting Inc. Address: 1400 E Business Center Drive, STE 108 Mount Prospect,
IL 60056 USA. Telephone number: 1-800-291-8838
Good Earth Lighting
®
workmanship for a period of (3) years from the date of original purchase by the consumer. The fixture is not warrantied for
use in a commercial or retail application. The warranty is limited to use in a residential environment. We will repair or
replace (at our option) the unit in the original color and style if available, or in a similar color and style if the original item
has been discontinued, without charge. Defective units must be properly packed and returned to the manufacturer with a
letter of explanation and your original purchase receipt showing date of purchase. Call 1-800-291-8838 to obtain a return
authorization number and an address where to ship your defective product. Note: C.O.D. shipments will NOT be
accepted. The liability of the manufacturer is in any case limited to replacement of the defective light fixture product. The
manufacturer will not be liable for any other loss, damage, labor costs, or injury which is caused by the product. This
limitation upon the liability of the manufacturer includes any loss, damage, labor costs, or injury which is (I) to person or
property or otherwise; (II) incidental or consequential in nature; (III) based upon theories of warranty, contract,
negligence, strict liability, tort, or otherwise; or (IV) directly, or indirectly related to the sale, use, or repair of the product.
This warranty gives you specific rights, and you may also have other rights which vary from state to state.
Need Help?
Tools Needed
Work
Gloves
Safety Information
3-Year Limited Warranty
- The manufacturer warrants this lighting fixture to be free from defects in materials and
Please visit our website at: https://goodearthlighting.com/contact-us or call the
Customer Care Center 1-800-291-8838, 8:30 a.m.-5 p.m., CST, Monday-Friday.
Drill
Electric
Masonry
Bit
Bit
WARNING!
The components of this fixture are not serviceable.
Attempting to alter the fixture for any reason may result
in voiding the warranty and could result in creating a
dangerous situation.
ATTENTION
LEDs can be damaged by electrostatic discharge
shock. To remove this hazard, touch a grounded bare metal
surface to discharge yourself before installation.
ATTENTION
Cold weather may a ect the performance of the
fixture. Alkaline batteries can lose voltage when
temperatures are near freezing. This will a ect the
performance of the PIR in your fixture. The security light
will perform as expected when temperatures rise.
Drill
Hammer
Safety Glasses
3