Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
6. Install hitch – Grand Cherokee only - Install the M8 factory bolt as shown in Fig. 1, raise exhaust into position and install items
side. Both - Slide in the hitch brackets though end panel opening into frame rails. Using pull wires ⑤ feed carriage bolts ① and spacers ② into the slots of hitch
brackets through end panel opening and then through the frame rail holes per side, see Fig. 1. Remove pull wires and loosely install conical washers ③ and hex nuts ④
to the frame rail, see Fig. 1.
©2022 Horizon Global™ Corp - Printed in Mexico
Grand Cherokee Only
Factory M8 bolt
opq
Sheet 8 of 27
76595NP
onto factory M8 bolt, each
05/19/22
Rev. A
Publicité
Table des Matières
