Horizon Global 76595 Instructions D'installation page 5

3. Remove fascia – Twist the knobs on the panel door to unlock, gently pull and remove the panel door. Using 10 mm socket remove (4) bolts at the bottom of fascia.
Open tail gate. Using a plastic trim tool remove a cap near trunk weatherstrip at bottom corner per side. Using a 10 mm socket remove (1) bolt behind the cap per side.
Use plastic trim tools to remove the fascia starting at the outer edges near the wheel wells and gently pull the fascia. Carefully disconnect wiring harness male part on
both sides (if present) while removing the fascia.
©2022 Horizon Global™ Corp - Printed in Mexico Sheet 5 of 27 76595NP 05/19/22 Rev. A