Victure HC200 Manuel De L'utilisateur page 15

All manuals and user guides at all-guides.com
password to enter into TEST mode. Please keep your password in
mind .
Serial NO. set
The default setting is OFF. When ON is selected, the four-digit
machine number can be set. After successful setting, the machine
number will be printed on the photo.
Format
This function can help you format your SD card. Select YES, then click
OK to confirm, the SD card will be formatted, the files in the card will
be deleted. Please archive the files you need before proceeding this.
Set clock
System time settings, the specific operations are as follows: short
press the left and right keys to move to the position you want then
adjust the time, from left to right are：the year, month, day, hour and
minute, short press the up and down keys to adjust the correspond-
ing settings.
Default set
This function will restore all settings of the machine to the default
state.
Auto power off
Under the TEST mode, when you don't operate the camera for a
certain period of time, the machine will automatically shut down to
save power.
Tip: The camera can be switched on again by pressing any button.
11