Product Accessories - Victure HC200 Manuel De L'utilisateur

Product accessories

B
Tips:
The shooting range of this product is 90 degree fan-shaped area right
in front of the camera. The best imaging distance is 3-10 meters in
front of the camera. In order to achieve the desired detection of
shooting, please install the camera following below instructions:
(1) Please attach the product to a suitable place, the installation
height is close to the height of the detected animal.
(2) Make a horizontal walk in front of the main PIR sensor window of
the product. When the indicator light flashes once, it indicates that
the PIR has sensed successfully. At this moment, the area you are in is
the valid detection area. Keep doing this test repeatedly, you can
obtain the effective detection area of the PIR sensor.
(3) If you make a vertical walk in front of the PIR sensor window, PIR
will not make a correct sense, so please walk horizontally. When you
doing walking test far away from the PIR sensor window, please speed
up the pace.
(4) According to the default setting, the camera will automatically
shut down after 5 minutes without any operation, so please press
either one of the button to wake up the system.
All manuals and user guides at all-guides.com
C
D
A
6
A. Drilled holes
B. Tripod bolt
C. Anti-screw
D. Hinge screws