Symbols; General Instructions; Use Of Accessories; Use - Imetec M3001 Instructions Pour L'emploi

all risks.
DO NOT obstruct the intake filter and always keep it
free from dust and hair.
Do NOT spray hairspray while the appliance is
switched on. There is a risk of fire.
Warning
Refer to page I of the Illustrative Guide to check the contents of the package.
All the figures are found on the inside pages of the cover.
1. Front grid
2. Intake filter
3. Handle joint
4. Handle
5. Technical Data
The hair dryer is provided with the accessories described above. The accessory is mounted
on the appliance by pressing it onto the front grid (1) of the hair dryer until it is inserted. When
finished using it, the accessory can be removed by pulling it firmly.
Styling nozzle (9)
Use the styling nozzle to direct the air jet as you wish.
IMPORTANT: use only the original accessories of the appliance.
The appliance has various control and function buttons, depending on the model. Refer to Figure
[A] in the illustrative guide of the instructions for use.
Appliance with combined air flow and temperature button (7)
The combined air flow and temperature button allows setting the air flow and temperature at the
following levels:
0 = OFF
1 = high air flow and low temperature
2 = high air flow and medium temperature
3 = high air flow and high temperature
Cold air shot button (8)
If the appliance is equipped with this button, it can be used to set the styling.
• If this button is pressed while the appliance is on, the hot air cools down and the set style
lasts longer.
• Once the button is released, the appliance returns to a hot air flow at the selected level.
IMPORTANT! Using the appliance with an incorrect voltage setting, which
does not correspond with that of the mains, can result in overheating and
damage the hair dryer.
• Thanks to the joint (3), the handle of the hair dryer can be bent to save space while travelling.
When the hair dryer is not used, unplug the appliance from the socket and store it in a dry and
dust-free place.
Do not wind the power cord around the appliance. Coil it up loosely without bending it.
IMPORTANT! Switch the appliance off and unplug it from the socket before
cleaning!
Make sure all cleaned parts are completely dry before reusing the appliance!

SYMBOLS

General prohibition

GENERAL INSTRUCTIONS

6. Attachment eyelet
7. Air flow/termperature seleciton button
8. Cold air shot
9. Styling nozzle

USE OF ACCESSORIES

USE

STORAGE

MAINTENANCE

6
Class II appliance