Commissioning And Operation - Blumfeldt Shinestone Mode D'emploi

Button
ON
OFF
Colour selection
FLASH
STROBE
FADE
SMOOTH
Brightness increase
Brightness reduction

COMMISSIONING AND OPERATION

Method of operation
The solar panel absorbs solar power during the day and transforms it into
electricity, which is then stored in the rechargeable battery. When darkness
falls, the lamp lights automatically using the energy stored during the day. The
period of operation of the lamp depends on its geographic placement, weather
conditions and the light that is available at the respective time of the year.
Choosing the ideal placement
Select an outdoor placement with full, direct sunlight where the solar panel
can receive at least 6 hours of sunlight per day. A shady placement affects
the charging of the battery and reduces the operating time of the lamp after
sundown. Do not place the lamp close to strong source of light such as street
lighting as this may cause the lamp to turn off automatically.
Function
Press the button one time to turn on the light.
When you turn the light back on after turning it
off, the light will have the same colour (or mode)
as before turning off.
Press the button one time to turn off the light.
Press the desired colour button to select one of
the 16 available light colours.
Press this button to make the light flash slowly.
Press this button to make the light flash rapidly.
Press this button to dim the light.
Press this button to make the colours blend into
each other.
The brightness of the light is increased by 25 %.
The brightness of the light is decremented by
25 %.
EN
13