Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3.3 Adjusting the angle of the handlebar
3.
1.
2.
1. Loosen the handlebar clamp bolts by turning them anti-clockwise until the angle of your handlebar can be adjusted.
2. Centrally align the handlebar and adjust the angle.
3. Tighten the bolts of the handlebar clamp alternately in small increments until you have reached the tightening torque.
For the required tightening torque see the stem of your bike or chapter "7.4 Torques" on page 53.
37
Publicité
Table des Matières
