Cleaning And Care - Korona 81004 Manuel D'instructions

3. Adjust fhe fan head to the desired tilt angle (see ADJUST TILT ANGLE )
4. Switch on the appliance by turning the speed control knob to the desired speed setting:
1=Low Speed
2=Medium speed
3=High speed.
5. After use, turn the speed control knob to 0 (Off) and unplug the appliance.
Never leave the appliance unattended during use.
ADJUST TILT ANGLE
Caution: The fan should always be switched off when making this adjustment!
Use the adjustment knobs on either side of the fan to loosen the tilt nut.
- Loosen the tilt nut by turning the knob into anti-clockwise direction.
- Adjust the fan head to the desired tilt angle by slightly moving it up or down.
- To fix the tilt angle, turn the knob into clockwise direction.

CLEANING AND CARE

Before cleaning, always switch off the appliance and disconnect it from the mains.
Never immerse the appliance in water. Danger! Electric Shock!
- clean the appliance using a a soft damp cloth.
- Never spray the appliance with liquids or submerge it in water or other liquid.
- For cleaning purpose, front and back grill as well as the fan blade can be removed.
After the cleaning process is finished make sure that all parts are dry and that the front/
back grill incl. fan blade are properly reassembled.
Never use alcohol, gasoline, and/or any other aggressive cleaning agents/hard objects.
CAUTION: The Fan Blade may have sharp edges. Handle with extreme care.
STORAGE
Keep the appliance away from children and store it in a clean and dry place, best in its original
box or cover it to protect it from dust.
Instruction Manual
ENGLISH
15