Description Of Parts - Korona 81004 Manuel D'instructions

1
10
9
11
8
BEFORE FIRST USE
• Remove all packaging material and check whether the appliance is complete and that all
accessories are included.
• Fully unwind the power cord.
• Clean the appliance as described under Cleaning and Care.
If any items are damaged or missing, contact your dealer or customer service.
Warning: Plastic bags are a danger to toddlers and babies, therefore keep them away
to avoid suffocation.
ASSEMBLY OF METAL BASE
Your high velocity floor fan only needs minimal assembly. Always ensure that the fan is
unplugged from the power supply and turned off before commencing with the assembly.
1. unscrew and remove the 2 screws from the metal tube.
2. Insert the metal tubes into the metal base and align the holes on each side of the metal
tube with the holes of the metal base.
3. Re-insert the screws and tighten them.
OPERATION
Make sure that the fan is properly assembled before operation.
1. Place your fan on an even, dry and stable surface.
2. Ensure the fan is set to 0 (OFF) before plugging it into a a power socket.
Make sure your local voltage matches the technical data of the appliance. Otherwise the
appliance may overheat and get damaged.
14
2 3

DESCRIPTION OF PARTS

1. Safety Screws (6x)
4
2. Front Grill
3. Rear Grill
6
4. Handle
5. Speed control Knob
7
- 0 (Off)
- 1 (Low)
- 2 (Medium)
- 3 (High)
6. Motor
5
7. Blade
8. Metal Tube + 2 screws
9. Metal Base
10. Knobs to adjust the tilt
11. Power cord and plug