Setting Self Clean With A Delayed Start - LG LSSG3016ST Manuel Du Propriétaire

50 MAINTENANCE
CAUTION
Do not force the oven door open when the lock
icon is displayed. The oven door remains locked
until the oven temperature has cooled. Forcing
the door open will damage the door.
Setting Self Clean with a Delayed
Start
1
Remove all racks and accessories from the
oven.
2
Turn the oven mode knob to select Self Clean.
The oven defaults to the recommended
three-hour self clean for a moderately soiled
oven. Press plus(+) or minus(-) to select a self
clean time from 2 to 5 hours.
3
Press Start Time.
4
Press plus(+) or minus(-) to enter the time of
day you would like the Self Clean to start.
5
Press Start.
NOTE
It may become necessary to cancel or interrupt a
Self Clean cycle due to excessive smoke or fire in
the oven. To cancel the Self Clean function, turn
the oven mode knob to the Off position.
During Self Clean
• The Self Clean cycle uses extremely hot
temperatures to clean the oven cavity. While
running the Self Clean cycle, you may notice
smoking or an odor. This is normal, especially if the
oven is heavily soiled.
• As the oven heats, you may hear sounds of metal
parts expanding and contracting. This is normal
and will not damage the oven.
• Do not force the oven door open when the lock
is displayed. The oven door remains locked until
the oven temperature has cooled. Forcing the door
open will damage the door.
All manuals and user guides at all-guides.com
After the Self Clean Cycle
• The oven door remains locked until the oven
• You may notice some white ash in the oven. Wipe it
• If oven racks were left in the oven and do not slide
• Fine lines may appear in the porcelain because it
temperature has cooled.
off with a damp cloth or a soap-filled steel wool pad
after the oven cools. If the oven is not clean after
one self-clean cycle, repeat the cycle.
smoothly after a self-clean cycle, wipe racks and
rack supports with a small amount of vegetable oil
to make them glide more easily.
went through heating and cooling. This is normal
and will not affect performance.
NOTE
• The Self Clean cycle cannot be started if the
Lockout feature is active.
• Once the Self Clean cycle is set, the oven door
locks automatically. You will not be able to open
the oven door until the oven is cooled. The lock
releases automatically.
• Once the door has been locked, the lock
indicator light stops flashing and remains on.
Allow about 15 seconds for the oven door lock
to activate.
• If the clock is set for a 12-hour display (default)
the Delayed Self Clean can never be set to
start more than 12 hours in advance.