Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Charger
AC Input
Part No.
Volts
982-21
120
Recommended Ambient Charging Temperature ...................40°F to 105°F
FUNCTIONAL DESCRIPTION
6
5
2
4
3
1. Contacts
2. Release buttons
3. Fuel Gauge button
4. Fuel Gauge
5. Electrical contacts
6. Bay
7. Vents
8. Light indicators:
Continuous red: Charging
Continuous green light: Charging is complete
Fast flashing red: Battery is too hot/cold - Charging
wil begin when battery reaches correct
charging temperature
Slow flashing red: Battery charge is pending - Charg-
ing will begin when the first pack is
fully charged
Flashing red/green: Damaged or faulty battery pack
All manuals and user guides at all-guides.com
SPECIFICATIONS
AC Input
Amps
2.1
8
5
2
DC Output
DC Output
Volts
Amps
12 or 18V
7
6
1
2
ALBION LITHIUM-ION BATTERY
1
Fuel Gauge
Use the Fuel Gauge to determine the battery pack's
remaining run time. Press the Fuel Gauge button to
display the lights. The Fuel Gauge will light up for
2-3 seconds. When less than 10% of charge is left,
1 light on the fuel gauge will flash slowly.
Approximate Run
Time Remaining
10-32%
Less than 10% if bottom light is flashing
NOTE: If the Fuel Gauge doesn't appear to be
working, place the battery pack on the charger and
charge as needed.
Compared to NiCd battery pack types, ALBION Lith-
ium-Ion battery packs deliver fade-free power for
their entire run time. The tool will not experience a
slow, gradual loss of power as you work. To signal
the end of discharge, 1 light on the fuel gauge will
flash quickly for 2-3 seconds and the tool will not
run. Charge the battery pack.
3
Battery Part No.
982-2
3
1004-3
SYMBOLOGY
Volts
Direct Current
Alternating Current
Double Insulated
Properly Recycle Batteries
Hertz
Amps
UL Listing for Canada and U.S.
PACKS
18V
78-100%
55-77%
33-54%
DC Volts
18
12
Publicité
Table des Matières
